Terms of use

Last updated 2026-11-12

Elecmetric is a set of electrical calculators for estimating. These terms apply when you use the site. If you do not accept them, do not use the results.

1. Estimating tool, not professional advice

Results are design assistance. They are not engineering, legal or safety advice and do not create an engineer-client relationship. You are responsible for checking every result against the applicable standard, the equipment data and local regulations, and for having a competent engineer review any design before it is built, installed or relied on. Do not rely on Elecmetric alone for safety-critical work.

2. Standards

Elecmetric does not contain the text or tables of any standard and does not claim that a result complies with one. Calculation bases (IEC, IS, BS, AS/NZS, NEC style) use selected method constants only. Names of standards and organisations are used to identify them. Elecmetric is not affiliated with or endorsed by their owners. Some calculation constants are provisional and have not been checked against the latest edition of the named standard; the verification section on each page says so where it applies. If you load standards tables or other third-party data into a calculator, you must have the right to use and enter it. Elecmetric does not supply licensed standards content and does not check your right to use it.

3. No warranty

Elecmetric is provided "as is" and "as available", without warranties of any kind, including accuracy, completeness, fitness for a particular purpose or uninterrupted availability. Automated tests and cross-checks against separately coded reference calculations reduce errors but cannot rule them out. The verification status on each page shows what has actually been done. No independent technical review has been carried out unless a page states otherwise.

4. Limit of liability

To the maximum extent permitted by law, Elecmetric and its owner are not liable for any loss or damage, direct or indirect, arising from use of or reliance on the site or its results, including project delays, rework, equipment damage or lost profit. Nothing in these terms excludes or limits liability for death or personal injury caused by negligence, for fraud, or for anything else that cannot be excluded or limited by law.

5. Acceptable use

Do not misuse the site, interfere with its operation, or present Elecmetric results as certified, approved or independently verified unless they have been.

6. Ownership

The site, its code, text and design belong to Rahul Sharma and are protected by copyright. You may use the site and link to it, but you may not copy, republish or resell the site or its content without written permission. Calculation sheets and results you produce are yours to use, subject to point 1.

7. Changes

We may change the site or these terms. The date at the top shows when they last changed; use of the site after a change is subject to the updated terms.

8. Third-party links and data

Pages may link to the websites of standards bodies, manufacturers and other organisations. Elecmetric does not control those sites and is not responsible for their content.

9. Copyright and other complaints

If you believe content on Elecmetric infringes your rights, or you find an error in a calculation, write to the contact address below with the page address and details. We will review it and reply, and we will correct or remove content where that is justified.

10. General

If any part of these terms is held unenforceable, the rest stays in force. These terms are the whole agreement between you and Elecmetric about the use of the site.

11. Governing law and courts

These terms are governed by the laws of India. The courts at Delhi, India have exclusive jurisdiction over disputes about the site, subject to any mandatory consumer rights you have under the law of the place where you live.

Contact

Elecmetric is operated by Rahul Sharma, India.

Questions, error reports and requests: elecmetrics@gmail.com.