Elecmetric

Density Converter

Convert density units with the factor behind each answer. Density is mass divided by volume.

Result559.3545268 lb/ft³

1 kg/m³ = 0.06242796058 lb/ft³

Common conversions

Mass over volume

Water is about 1,000 kg/m³ (1 g/cm³). Copper is about 8,960 kg/m³ and aluminium about 2,700 kg/m³, which is why the cable conductor mass depends on the material.

US gallons in lb/gal

lb/gal here uses the US gallon. A fluid quoted per imperial gallon has a different number for the same density.

Unit factors

Every unit in terms of the base unit shown. To convert, multiply by the factor of the unit you have and divide by the factor of the unit you want.

UnitEqualsWhat it is
g/L1 kg/m³Gram per litre, equal to kg/m³.
kg/m³1 kg/m³Kilogram per cubic metre, the SI unit of density.
kg/L1,000 kg/m³Kilogram per litre, equal to g/cm³.
g/cm³1,000 kg/m³Gram per cubic centimetre. Water is about 1 g/cm³.
lb/ft³16.01846337 kg/m³Pound per cubic foot.
lb/in³27,679.90471 kg/m³Pound per cubic inch.
lb/gal119.8264273 kg/m³Pound per US gallon.

Frequently asked questions

What is the formula to convert kg/m³ to lb/ft³?

lb/ft³ = kg/m³ × 0.06242796058. For example, 8,960 kg/m³ is 559.3545268 lb/ft³.

How do I convert lb/ft³ back to kg/m³?

kg/m³ = lb/ft³ × 16.01846337. The Swap button above reverses the direction for any pair of units.

Related

AWG to mm² (wire gauge)Conversion CentreElectrical Unit ConverterBattery Capacity ConverterPower ConverterEnergy ConverterVoltage ConverterCurrent ConverterResistance ConverterFrequency ConverterCapacitance ConverterInductance ConverterAngle ConverterPercent and PPM ConverterLength ConverterArea ConverterVolume ConverterMass and Weight ConverterForce and Torque ConverterPressure ConverterTemperature ConverterFlow Rate ConverterMagnetic Flux Density ConverterIlluminance and Luminance ConverterRotational Speed ConverterThermal Conductivity ConverterTemperature Difference ConverterSpecific Heat Converter

Tell us how to improve this page

This opens your email app. Nothing is sent until you press send.